Photon Mono M7 MAX

the plate was faulty from the factory and what research i did, and i did a lot (sanding was not my first choice) i was trying to find any other solution (exposure times, bottom layers, lift height & speed, diffrent resin & temps) all the options. even look into contacting anycubic but found several

Which is why I returned my M7 Max after three weeks of frustration. From what I could gather, apparently it's a combination of the screen being seated ever so slightly too low, and the build plates not being perfectly flat out of box. As if that weren't annoying enough, you can't set a z-offset on t

None of them. The GK3 Ultra is a dumpster fire where they replaced the dual linear rails for a single machined aluminum rail and there's Z axis flex (see J3DTech's video on it). The Mega is an antique still using a matrix LED UV light source, although it's the largest currently. The Jupiter 2 hasn't

Hello, I'dont know did you read all posts in this reddit. Will write you down. You can also contact me so i can send you photos from my printer if u need further help. Anycubic Photon Mono M7 Max is just screwed printer with a lot of fatal design mistakes, it's just crazy. I cannot tell is it proble

Using this with the M7 pro the "camera" thing is "coming soon" (probably just for the P1 - though I added my own camera, I doubt there is a plugin to add the IP address for it). Likewise the "smart monitoring" (shows the peel force etc) is totally empty - so the M7/M7 pro is not sending that data to

Anycubic QC is trash lately. Get one of you like gambling and losing a lot. S4U has issues around auto-leveling/force sensor system, M7 has it worse as it doesn’t have as many tools to deal with it. The S4U 16K also has an over powered UV light source that makes calibrating a challenge. Saturn 3 non

I’ve seen multiple M7/M7 Pros with concave build plates, as well as M5s and M7 Max. Even J3DTech’s review of the M7 Max showed a concave plate, although he politely declined to criticize Anycubic over it. I have helped multiple people on Discord and Reddit with adhesion issues with these printers an

There's a bunch of bookmarks to the right. M7 Max isn't exactly a beginner printer though. Why did your friend sell it cheap? I would run through some basic checks. Check the build plate is flat, Anycubic seems to have issues with QC and lots of plates are being delivered concave. Level the printer

It’s worse because you can’t use per layer wait before print/light off delay with Anycubic printers. So if you’re thinking of an M7… lemme just say, between Anycubic’s poor QC and no per layer wait times, the Elegoo are just better. Only plus they have is no AA bug because they only use 4-bit AA. Fr

The M7 series is a different animal than the other printers by Anycubic. I just recently purchased my first M7. Although it is not a Max, I can understand what you are talking about. This is my 9th or 10th printer, and it is literally the first one that has a loading process at startup. I'm not sure