Kobra X

Keep in mind you’re essentially a beta tester with the Kobra X, its initial presentation might look promising but it’s not proven long term. My personal experience with Anycubic has not been reliable or trustworthy. After a Kobra 2 and a Kobra S1, I wouldn’t trust anything they make anymore. They’re

Your problem is indeed caused by the internal power supply of your Kobra X, specifically the 150L AC-DC power supply shown here in the photos. Here’s what likely happened (I think): The metal connectors (terminals) that connect the power cables to the power supply board weren’t making a perfect elec

I had the exact same thing happen on my Kobra X when I attempted to use TPU filament. It got all jammed up inside the extruder and when I tried to open it to clear the jam, I stripped the two screws on the sides of the hotend. I used their webpage (wiki.anycubic.com) Contact Us to report the problem

Because I love these projects and this is just the start of a long series R: The Turboprop took around 70 hours to print at 0.16 mm, mainly using PETG-CF, with PLA for the propellers and TPU for the skids L: The Space X Raptor 3 took around 12 hours at 0.20 mm and 0.12 mm, printed entirely in PLA Th

Wenn Platz hast , Bambulab A1 mit AMS wenn du Zeit hast bis er ankommt und dich vorher schlau machst, was damit alles schiefgehen kann: Kobra X von Anycubic. Wir haben hier im Bekanntenkreis 4 Stück davon und sind alle voll zufrieden

The Anycubic Kobra X might be a better buy. It’s $299 and have 4 color printing built in, less material waste and is fast. I have 3 and they are workhorses. Over 500 hours on each or close to it.

Depends on your budget. Some have good luck with the Snapmaker u1, mine have been a little unreliable. But for multi-color a toolchanger is faster and ultimately the best call. More are coming soon. 900 Best for stated purpose (ignoring cost) Bambu H2C, 2400 (3k all in). Best eco system. Most reliab

So far, honestly, my experience with the Kobra X has been very positive. I was a bit cautious at first too, mainly because Anycubic’s older reputation made me expect some headaches after the first weeks, but this machine has actually surprised me in a good way. It’s been reliable, prints consistentl

I seem to be the odd man out. I have a Snapmaker U1 and it has not work since day 1. Snapmaker has been aware if the problems and still done nothing to address them. Feeder issues toolhead issues software issues you name it. I have no resolution to the problems. My P1S with 4,000 hours no problems.

Flashforge sucks. Literally any other brand is worth while. Look at the Anycubic Kobra X, love mine, it’s been a fantastic printer.