Saturn 4 Ultra

I'll just assume it bots or something, but for whatever reason, this thread is just filled with wrong answers. Well, technically the Wait time before print suggestion is correct, but is still useless because it fails to provide any guidelines for settings or why it works. Rest / Wait time is why you

The S4U springloaded plate means that wait times are even more mandatory than regular printers. The light turns on way before the resin has settled and the springs have found home. This means you get a layer thicker than supposed especially at 20um, your bottom layers are probably closer to 0.5 or e

No build plate flatness issue with the Saturn 4 Ultra outside rare individual defects, but it will typically not achieve 100% perfect Z accuracy the first several layers. You will want to use a high amount of Rest After Retract (Chitubox) / Wait time before cure (UVTools) using UVTools for the first

I used to be a loyal Elegoo customer, but know that I will never buy from you again. I’m switching to Lychee right away. This has nothing to do with Elegoo... in fact Elegoo has been pissed at Chitu Systems for a long time now as well. Enough so that they developed the .goo file extension... and rel

And add more rest before print. Best topic on it. https://www.reddit.com/r/ElegooSaturn/comments/1jwcwg2/fixing_saturn_4_ultra_elephant_foot_and/

I recently found this as well. It appears recent firmware to avoid the "lasagna bug" is either skipping layers or skipping the gray pixels when it can't load the image to the LCD fast enough. I have similar results with my own experiments in vertical smoothing / AA here: https://www.reddit.com/r/res

Did it start to fail at the back and split moving forward like this? https://www.reddit.com/r/resinprinting/comments/1n8gh14/help_with_st_flex_black_70a_parts_of_print_stop/ If so it is partially because the resin stretches and the tilt stroke of the S4U is shorter at the back than the front. Fixes are roug

That will be a screen replacement. And, yeah it's getting too common with the S4U just past the 1 year mark. Here's my theory on the source of the problem - bad software configuration of the automatic leveling system and lack of a baked in Rest After Retract along with a couple methods to prevent th

You need Rest After Retract (Chitubox) / Wait time before cure (UVTools name) using UVTools to increase it for the first 10-20 layers to 10-20s. On the lower UV power S4U 12k, I am running base layers around 12-15s exposure for all of 3 base layers and 3-5 transition. UVTools is required as none of

Just going to copy-paste my comment from a couple weeks ago on the matter of S4U dead LCDs: For you next LCD, definitely look into use Rest After Retract (Chitubox) / Wait time before cure (UVTools name) via UVTools for the first 20 layers or so like the following settings: https://www.reddit.com/r/