Q1 Pro

Description do this mod at your own risk, i am not liable for any damages that might occur during install or tear down of your 3d printer and or accessories. that being said, do you want your qidi q1 pro to be less functional? do you hate all those features they gave you like heated enclosure for st

Ok well you have options, there are just pros and cons with all of them. Bambu P1S w/ AMS - Enclosed, fast, will handle most these materials. May need to upgrade extruder if you plan to do filled materials after awhile, it tends to get eaten. Doesn't get super hot in enclosure (thin sheet metal, no

The Qidi Q1 Pro Tech might work well, it’s on sale at the moment. Does anyone have any experience with this printer? I would be concerned with a diminishing availability of repair and replacement parts as Qidi moves forward in this product line up. Also while it has a chamber heater, there is no ven

Beim Qidi Q1 Pro war damals die Bauraumheizung offen, wie bei einem Toaster - wenn der Wind günstig stand, konnte man die Bauplatte direkt ins Heizelement schieben und hat dann 230 V an der Bauplatte anliegen gehabt - haben sie dann später auch mit einem "Gitter" versehen, damit das nicht mehr passi

That's a big fat lie, the Qidi Q1 Pro STILL doesn't have a way to properly factory reset.It has the option in the menu, it just doesn't do anything right. So yeah, sometimes these machines don't do what we tell them

RP2040 doesn't like heat. In the Q1 the toolhead has no ventilation so at 60 °C the rp2040 is at its limits (yes the rp2040 can run 20 °C hotter than the air around it). Maybe newer models improved the ventilation, or they switched to a rp2350 which has higher temperature tolerance. If you print htt

Ok so I own 20 printers (21 if you count the creator pro). I've been printing for 10+ years. And I just ran bed calibration on 8 of my anycubics but I also know the bed calibration on 8 of my QIDIs and 1x P1S and 1x Sovol SV08. The average is NOT .1 mm. Far from it, probably closer to .4mm. So I thi

Same here with the Qidi Q1 Pro. Never got anything but endless ai emails and lost over $450

So as someone who did an entire gantry rebuild of the Q1P, I can say that the Y-axis rods are also epoxied in. I will say that it's generally not worth it to take it apart to swap things out. It's extremely tedious and you have to deal with taking out epoxied hardware without damaging things. Here i

Thanks for the comment! I have an A1 mini but this was done in ASA on my Qidi Q1 Pro. It's a mess. My models are insane and do not print well at all due to so much going on with how they connect to each other. Also it may seem roomy on the video but it's real tight inaide and hard to fit everything