SV08

Não recomendo pegar pensando em fazer negócio disso. Pegue primeiramente para você, como hobby ou ferramenta para o dia a dia. Se surgir oportunidade de fazer negócio, aí você aproveita, mas entrar pensando que vai ganhar dinheiro, você vai se decepcionar. Tendo dito isso, recomendo pegar uma fechad

I use several printers, mk3.5, core one, P1P, H2S, Sovol SV08MAX, (will soon add a Sovol ZERO) The cheapest solution, not repair but upgrade the mk3, you can convert the mk3 into a mk3.5: https://www.prusa3d.com/product/original-prusa-i3-mk3s-to-mk3-5s-upgrade-kit-5/ This calls 279€ no einsy MCU nee

I modded my sv08 into a stealthchanger and replaced the mainboard with a btt kraken. The first thing you should upgrade imo is the dinky 150w psu with something like the lrs350-24. I think upgrading the mainboard is worth it because the stock board is cheap af, and you will save yourself from a lot

Don’t know what machines you have but my sv08 prints better than my Bambu so…

edit actually, I see now that those are Voron builds with green accents, not the ratrig vcore. So I guess feedback would mostly pertain to sovol performance I'm currently going back and forth between a RatRig Vcore and Sovol SV08 Max, in search of a 500mm build volume. Since you appear to run both,

I'd say a SV08 greatly benefits from Mainline + Eddy + Triangle Labs or Microswiss Hotend. This with some good macros gets you 90% of the way. Then f.e. a case + chamber heating for some more challenging filaments like ABS/ASA or similar. Lastly INDX or Stealthchanger if you want multimaterial.

It was a great feeling that immediately after assembling my Sovol SV08 Max I had successfully printed something where as my CR-10 S5 took disgusting amounts of effort to print anything even bad quality and still required upgrades to get marginally better results.

Core One! While I’m sure the SV08 is tuned decently, my Core One has been perfect. I have a Voron 2.4 for tinkering, and will likely build a trident for INDX.

You know I picked up an SV08 recently because the deals were just amazing. But as I researched, it seemed like I was going to have to replace the probe, hotend, extruder, do some kind of jury-rigging to make the bed flat, etc. Turns out it works great right out of the box. I'm replacing the hotend j

I backed the U1 simply because snapmaker is a well established company. Did the same with the Sovol SV08 Max. I’m also really looking forward to fitting the Bondtech INDX on the SV08 Max. I can only imagine how many extrusion heads I’ll be able to fit in that thing. (Slaps roof)