K1 Max

I just went through all these same issues with my k1 max upgrade. So many small changes needed from ptfe tube, orca slicer printer codes, new cfs extruder and cut module, and cfs feeder/splicer jamming and feeding wrong. Finally still working 80% of the time with Minor ghost feeding and retracting w

That doesn’t look bad at all, but these beds warp differently depending on the temperature. Because of this, the factory bed leveling doesn’t work properly. If you hven’t already, root the printer and you can level the bed at the temperatures you are actually printing, use kamp and you shouldn’t hav

I’m glad I didn’t hold out for the CFS-C for my 2nd printer and just bought a 2nd CFS v1 with extruder upgrade kit. What’s clear is that software and firmware isn’t a strong point. It took some effort to get the CFS working with OrcaSlicer and playing with KAMPS nicely. If you’re prepared to do the

Compra um rolo de ABS de marcas boas importadas como Creality, Elegoo, Bambu, etc. e manda pau na sua K1 Max com tudo fechado. Usa o perfil básico do Creality Print para ABS e pronto. Vai ver que funciona sem problemas. Depois você pode ir comprando marcas mais baratas e obscuras para testar. Eu já

Mine ate its teeth the other day, so I printed a little adapter that glues into the original connectors socket and allows you to use better quality screw in connectors. Used this file: https://www.printables.com/model/1188175-creality-k1-max-extruder-ptfe-tube-holder-adapter

Yo iría por la A1, las he visto durar mucho más con mucho menos mantenimiento dentro de lo que es la comunidad y la calidad es muy superior a las Creality, la V3 nunca tuve y no creo que sea mala máquina pero la facilidad de uso y la dureza de la A1 ayuda mucho, tiene más sensores para detectar erro

Welcome to the.... crew? Crowd? Grumpy old people? Because its a K1, there is an older and newer model. The trick is to find out what you have. QUALITYThe K1C, K1SE, and Newer K1s, and K1 Maxs have a smaller X/Y pully. Its a 20 tooth over the older 40 tooth. It was changed to help with VFA. The step

Had this happen to me just yesterday, I recognise the "black lines" "black bits" in the layers. It turned out to be the extruders gears made of black plastic parts, wearing down causes black dust particles, as seen when we stripped down the Creality K1 MAX, now I have a Bambu H2D, I was not expectin

I have a K1max. Mine is rooted so I can run input shaper. It helped with ghosting and was free. I have the original unicorn hot end. I am running the Creality Obxidian nozzle. I also noticed a reduction in ghosting when I add the DXC extruder.

Im a bad example - ive been 3D printing since reprap (2005/2006)I have 3 k1max - had a K1 since its pre-launch, and a MAX's since they launchedive not had a single issue i havent been able to resolvethey are push print and walk away reliable for meive only recently started playing with the color sys