K1C

I can't confirm whether or not this is the cause of the problem as I am not about to disassemble my K1C. From a printer-mechanic point of view, this does not make a whole lot of sense. A wobbly bushing on the second gantry rod should not cause dimensional inaccuracies. If it were a fault (and not de

The k2 was designed with multimaterial in mind, it functions far better as a whole than either of crealitys attempts at cfs and cfs-c The K1 makes a larger purge tower with the cfs-c to compensate for the lack of a poop chute

I can see why you have frustrations. Both my K1M’s had 2k+ print hours before I started modding them. Tuning took a while on them before modding, but once dialed in - print results were great. Modding is a black hole that I may never climb out of - I’ve tried 6-7 different hotends, BCJ linear rail s

I second almost all of these points. I ordered my C1L from PrintedSolid and liked that it was assembled in the US. Got it last week which was a 3 week delivery time so they beat the 4-6 weeks lead time they had posted. I can’t compare to a bambu labs machine, I don’t like their cloud restrictions so

Depends on the model you are looking at for both, the unicorn hot end is standard in the k2, linear rails, (possibly lidar for automatic pressure advance), Ai camera, integrated support for the CMS systems, some other improvements. I have the standard K1 (2023 release) as well as the k2 plus so I ca

Fwiw after 4 printers I ended up with a creality k1 . Been using it round the clock for the last year. Occasionally jams. Otherwise love it compared to the other machines I’ve owned.

The linear rail upgrade on the KE has a few benefits, as mentioned is a bit lighter, they don't loosen up, and are a little more stable. Downfall is if the bed frame is printed from PETG, long-term 65°C prints will cause the bed to sag and requires constant leveling. Best if printed from PC-CF or AB

picked up a Creality K1 last July, it has been a really Joy. Only one big problem, I had to replace the Hot end & the extruder motor,. easy to replace. Since I had a Later model K! it had a lot of the upgrades already present. If I was to buy one now I would get the K1C which has the camera.

Der Plan ist, dass das Filament vom CFS-C eingeschoben wird und der Extruder es mit den Zahnrädern einzieht. Bei mir (am K1-max) klappt das auch noch nicht ganz zuverlässig. Vermutlich ist die Montage des Runout-Sensors mit einer Schraube nicht exakt genug. Ich bin da mit Creality noch in Kontakt un

no, at least not for most people. the issue is a combination of uneven thermal expansion because the middle of the bed is hotter, and internal strain in the rolled aluminum bed. Actually good beds are made of 8mm thick cast aluminum that expands uniformly. This bed is made of rolled 3mm aluminum and