Adventurer 5M

As someone who owns resin printers, CoreXY, and bedslingers, there is nothing more reliable than the A1/A1 mini. The A1s are mechanically simple. The amount of belts, rails, screws, etc are much lower than on a CoreXY. Less maintenance, more reliability. The only stability concerns with any bedsling

Make sure you select "Flashforge" under Host Type. When Orca switches to the device tab, it needs the Device UI to be (set also in network preferences) : http://192.168.1.20:8080/?action=streamObviously, you need to enter your actual IP address. The AD5MPro uses a stripped down Klipper from the fact

On the AD5X, go to Device Info, Copy Logs. The machine will copy the logs into USB. Use password FFP0286&*%root to open files. The log should give you the firmware. I found the one called firmwareExe.txt. If you scroll past all the junk you should find the firmware version installed and the date/tim

Als Alternative die oft übersehen wird könnte ich den Flashforge Adventurer 5M Pro eventuell empfehlen. Der Drucker wird seit fast 3 Jahren verkauft und ist auch von der Firmware her sehr ausgereift. Vom Komfort ähnlich wie ein Bambu Lab, aber die machen keinen Quatsch mit der Firmware und haben ein

MY PROBLEM: OrcaSlicer screwed up on an STL, which would only print 2 layers and quite. I researched and didn't find THE CAUSE. Solution was to use a different Slicer. I did several slicers and chose PrusaSlicer - it works. PrusaSlicer doesn't have Flashforge profiles. I setup a Machine profile and

As a side note, I was unable to get Orca Slicer to work wirelessly with my machine (AD5 Pro). I used their own Flash Print (trash software, but I could upload stls and send them wirelessly to my printer. It's like a slicer for toddlers, imho). I tried Orca Flashforge (which is just their own fork of

so i missing something, everything was great, printer updated firmware... adv pro 5m has an IP, i can ping it, orca flashforge 1.6.2 says it's offline, flashmaker 2.2.2 (32) says it's offline, flash studio says it's online but i can't slice anything with flash studio. How do I get this thing working

I just picked up a pre-owned AD5M Pro off marketplace for $250. It's virtually brand new. Yes you the screen to set up networking and other things. If you go that route, make sure the previous owner clears out all his accounts. I can't connect to the cloudprint feature because the previous owner did

Flash studio on phone and laptop. This is the new app and it wouldn’t let me use the old ones. Previously had a 5M until it took a shit a few weeks ago. I’m not having luck with flashforge, but still have hope

This just happened to me. I opened flash Maker on my phone and it showed back up online in orca-flashforge on my PC. It really sucks if orca flashforge is done, I just learned how to use it! I've only had my 5M pro printer since December. 😞