SV08

Don’t know what machines you have but my sv08 prints better than my Bambu so…

It was a great feeling that immediately after assembling my Sovol SV08 Max I had successfully printed something where as my CR-10 S5 took disgusting amounts of effort to print anything even bad quality and still required upgrades to get marginally better results.

You know I picked up an SV08 recently because the deals were just amazing. But as I researched, it seemed like I was going to have to replace the probe, hotend, extruder, do some kind of jury-rigging to make the bed flat, etc. Turns out it works great right out of the box. I'm replacing the hotend j

The only official mini voron is the 0.2. (and technically the 0.1 I guess) idk much about "engineering materials", but no voron uses a chamber heater. It's not endorsed nor allowed to be discussed(see rule 7 for this sub). Precision/quality is all on you. Build it right and it'll be as precise as yo

Hi, I had my sv08 for about a year now. Most of the time it was running the sovol klipper version, which supports the most used features, but fails when it comes to more advanced modifications to the printer. Here are some upgrades i made: sovol enclosure (leaks a lot of heat but can be insulated) s

I deem that unlikely, as the two biggest markets for BBL are hobbyists/enthusiasts and farms. Even if every cosplayer would only buy BBL, the market for bigger volumes would be tiny compared to small and mid-sized printers. Issues scale exponentially with volume: belts get longer, reduced stiffness,

SV08 MaxElegoo Neptune 4 Max (this is 48cm on the Z-Axis)Comgrow T500Anycubic Kobra 3 Max (50cm on the Z-Axis) They get more expensive after that and out of your price range. At $2400 you hit the Venture XL and Elegoo Orangestorm Giga. After that you're moving into the world of Industrial machines l

For my SV08, i flash mainline, install StrideMax Dual FD for 5160, Meanwell PSU 350w 48v, LDO-2504ac, Voron CNC gantry and XY joints and Cartographer V4, So far i tuned to 52V, Cartographer makes auto offset, LDO motor keeps silence, CNC gantry and XY joints makes more quality prints, and Phaetus co

SV08 has higher potential but it takes initial effort

This printer won't break down like the SV08 and SV08 Max, so shipping costs will be a major concern here for Sovol. If I had to take an educated guess, I'd say this machine is 350mm³ max; 300mm³ would be more likely. It'll be larger than the U1 and Creator 5, but not by a huge margin.